Water-Resistant Single Port Temperature and Humidity Sensor




In situations where both temperature and humidity can be critical, you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.

Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the presence of the sensor and configures it for you.

All you need to do is set your thresholds for low and high warning and critical parameters. The built-in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.

Additional information

Weight N/A


• Monitors temperature and humidity on a single intelligent sensor port
• Designed for use in wet/damp/outdoor environments
• Own SNMP OID for data collection via a network
• Temperature measurement from -40ºC – +75ºC
• Relative Humidity measurement from 0% – 100%
• Powered by base unit, no additional power needed


Sensor element wettable without damage.

sensorProbe auto-detects the presence of the dual sensor.

Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe.

Measurement Range
• -40°F to +167°F (-40°C to +75°)

Measurement Resolution
•  1°F (1°C) increments

Measurement Accuracy
• Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF
• Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC

Humidity Measurement
• Range 0% to 100% Relative humidity

• 1%

• 25°C ±3%

• UTP Cat 5 cable

Power source
• Powered by the sensorProbe. No additional power needed

Power Consumption
• Typical 7.25 mWatt, 1.45mA




There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.